John McKee
|
|
« on: March 23, 2010, 02:02:17 pm » |
|
What features will the MK6i firmware update add to a TDX SP delivered March 2008?
|
|
|
|
jakeyboy1
|
|
« Reply #1 on: March 23, 2010, 10:36:26 pm » |
|
what vs are you speaking off? The current vs is 1.9
|
|
|
|
|
John McKee
|
|
« Reply #2 on: March 23, 2010, 11:19:57 pm » |
|
I'll check... I'm in the 3G Arrow at present. I have not updated the software. It is the version that came with the TDX SP in early 2008.
|
|
|
|
John McKee
|
|
« Reply #3 on: March 24, 2010, 12:25:11 pm » |
|
TDX SP MK6i Software Version 1.6.1
|
|
|
|
jakeyboy1
|
|
« Reply #4 on: March 24, 2010, 05:22:06 pm » |
|
Each firmware upgrade deals with new options/electronics that have come available. If you aren't adding anything new, you don't need the new firmware.
For example: the Infrared unit and the attendant control came to market after vs 1.6. If you were to add either option, you would need to upgrade the firmware to 1.8 or higher. The new color MPJ joystick will need vs 2.0.
|
|
|
|
John McKee
|
|
« Reply #5 on: March 25, 2010, 12:03:12 pm » |
|
Thanks... I'll use the old adage... "If it an't broke don't fix it."
|
|
|
|
kgjrnascar
Newbie
Posts: 16
|
|
« Reply #6 on: March 30, 2010, 08:20:49 am » |
|
When is the new 2.0 firmware coming out?? Will the new 2.0 firmware make the microne displays have the new look and features as the new color display??
Thanks, Kirk
|
|
|
|
jakeyboy1
|
|
« Reply #7 on: March 30, 2010, 02:49:59 pm » |
|
I think 2.0 will be available when the color display is launched.
The 2.0 firmware will only do you any good if you have the color joystick/display....
|
|
|
|
sbertsch
Newbie
Posts: 12
|
|
« Reply #8 on: June 03, 2010, 10:10:52 pm » |
|
I just got the MK6i programmer and it says the version is 1.3.1 - where can I get the latest version? What is the latest version?
|
|
|
|
jakeyboy1
|
|
« Reply #9 on: June 04, 2010, 09:54:35 am » |
|
The programmer is a different animal then the chair.
The lastest version for the programmer is 1.3 The lastest version for chairs is 1.9
Your chair might need to be updated. Plug the pro card into the MPJ joystick, turn on chair and see if the screen says "new firmware available".
|
|
|
|
sbertsch
Newbie
Posts: 12
|
I put the Pro SD card in the joystick control box and it said version 1.10.0 was available so I did that update. The Pro card had "ver. 0" hand written on the card. Not sure what that means.
Is there a way to update the MK6i programmer display unit as well? Mine shows that it's 1.3.1.
Is it okay to use the programmer box for all changes instead of the joystick box? It's difficult for me to look down at the joystick box.
Steve Bertsch
|
|
|
|
jakeyboy1
|
You pro card has version 2.0
The latest version for the programmer is version 1.3.1 (read previous posts)
Using the programmer or the joystick to make changes work the same. Using the programmer is easier...
|
|
|
|
sbertsch
Newbie
Posts: 12
|
Okay. If I use the programmer to make changes, do I need to put the Pro SD card in the slot on the programmer when using it?
Steve
|
|
|
|
jakeyboy1
|
You do not "have" to put the card in the slot on the programmer.
However, with the pro card in the slot, you will be able to access the "help" file. I always leave my pro card in the slot.
|
|
|
|
compmc
Newbie
Disability: polio
Invacare Equipment: m91
Posts: 1
|
|
« Reply #14 on: March 01, 2018, 08:40:21 pm » |
|
Hello jakeyboy1, It seems that you are the snake killer for issues with electronics as far as the Invacare boards go. I am looking for some education regarding the MK6i remote programmers, the one I have has version 1.2 software and I looked to see if there was an updated version. I found version 2.2.2 on the Invacare support page. Is that for the MK6 joystick only? Or will that work to upgrade the remote programmer? Also, I am seeing the “Pro Card” is needed to down load the upgrade. Can I just get an SD card and find the program & data files available to create my own Pro Card? Any help would be wonderful. Thanks, compmc
|
|
|
|
|